LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Volt >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Position Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the driver side inflatable restraint lower module. Refer to Inflatable Restraint Instrument Panel Lower Module Replacement - Driver Side .
  2. Disconnect the electronic brake control position sensor electrical connector.
    3. Fig 1: Electronic Brake Control Position Sensor Bolts
    GM2384635Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 electronic brake control position sensor bolts (1).
    4. Fig 2: Electronic Brake Control Position Sensor
    GM2384640Courtesy of GENERAL MOTORS CORP.
  4. Remove the electronic brake control position sensor (1).
scientia non olet · About LEMON Manuals