Front Side Door Lock Cylinder Rod Replacement

Fig 1: Rear Side Door Outside Handle Rod

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front side door lock. Refer to Front Side Door Lock Replacement .
1	Front Side Door Lock Cylinder Rod Procedure Remove arm rest support. Remove the water deflector. Place the window in the full up position. In order to prevent outside handle lever pre-load, latch, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral latch clip to outside handle rod. Integral latch clip shall be in the full up position while securing to outside handle rod. Refer to Front Side Door Outside Handle Rod Adjustment . Tip: Inspect the door lock system for proper operation before installing the door trim panel.

Callout

Component Name

Preliminary Procedure:
Remove the front side door lock. Refer to Front Side Door Lock Replacement .

Front Side Door Lock Cylinder Rod

Procedure

Remove arm rest support.
Remove the water deflector.
Place the window in the full up position.
In order to prevent outside handle lever pre-load, latch, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral latch clip to outside handle rod. Integral latch clip shall be in the full up position while securing to outside handle rod. Refer to Front Side Door Outside Handle Rod Adjustment .

Tip: Inspect the door lock system for proper operation before installing the door trim panel.