Fuel Pump Flow Control Module Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Pump Flow Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Fuel Pump Flow Control Module Fastener CAUTION: Refer to Fastener Caution Tighten: 8 N.m (71 lb in)
2	Fuel Pump Flow Control Module Procedure Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement . Disconnect the electrical connector. If replacing, reprogram the module. Refer to Control Module References

Callout

Component Name

Fuel Pump Flow Control Module Fastener

CAUTION: Refer to Fastener Caution

Tighten: 8 N.m (71 lb in)

Fuel Pump Flow Control Module

Procedure

Remove the left body side trim panel. Refer to Body Side Trim Panel Replacement .
Disconnect the electrical connector.
If replacing, reprogram the module. Refer to Control Module References