October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Inflatable Restraint Front Passenger Position Sensor Bracket Replacement
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
Preliminary Procedure:
Remove the front seat. Refer to Driver or Passenger Seat Replacement
. |
| 1 |
Inflatable Restraint Front Passenger Position Sensor Bracket Procedure
- Detach the seat back cushion cover bottom two bungie clips from the crossbar to gain access to the sensor bracket.
- Disconnect the electrical connectors, if equipped.
- Remove the front passenger position sensor bracket from the seat cushion pad support spring wires.
|