October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT
.
- Disconnect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.
- Disconnect the windshield washer hose clip from the corner of the air cleaner housing.
Courtesy of GENERAL MOTORS CORP.
- Loosen the air cleaner outlet duct clamp (1) at the throttle body.
- Loosen the 6 air cleaner housing cover screws (2).
- Separate the air cleaner outlet duct from the throttle body.
- Remove the air cleaner housing cover (3) (with outlet duct).
- Remove and discard the air cleaner element (4).