LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Suburban K2500 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Sensor Relearn >> Scan Tool Learn Enable Method
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Learn Enable Method

  1. Using a scan tool, initiate the TPM Learn Mode. A double horn chirp will sound indicating the Learn Mode has been enabled. The left front turn signal will also be illuminated.
    IMPORTANT:

    In the event a particular sensor's information is displayed on the special tool upon activation but the horn does not chirp, it may be necessary to rotate the wheel valve stem to a different position due to the sensor signal is being blocked by another component.

  2. Starting with left front tire, follow either of these 2 procedures:
    • Increase/Decrease Method:  Increase or decrease tire pressure for 8-10 seconds, then wait for the horn to make a chirp sound. The horn chirp may occur before the 8-10 second pressure increase/decrease time period has been reached, or up to 30 seconds after the 8-10 second pressure increase/decrease time period has been reached
    • Sensor Activation Tool Method:  Starting with the left front tire, hold the activation tool against the tire wall aiming upward with the antenna. Press the activate button and wait for a horn chirp.
  3. After horn chirp has sounded, repeat procedure for the next 3 sensors in the following order: right front, right rear and left rear.
  4. When the left rear sensor has been learned and a double horn chirp has sounded, the learn process is complete and the RCDLR exits the learn mode.
  5. Turn ignition OFF, adjust all tires to the recommended pressures.
scientia non olet · About LEMON Manuals