Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Open the Rear compartment lid. Program the remote control door lock receiver after replacement. Refer to Control Module References .
1	Remote Control Door Lock Transmitter Assembly Tip: Working through the access hole, disconnect the electrical connector. Push the two tabs towards the module assembly in order to release the module from the panel.

Callout

Component Name

Preliminary Procedure

Open the Rear compartment lid.
Program the remote control door lock receiver after replacement. Refer to Control Module References .

Remote Control Door Lock Transmitter Assembly
Tip:

Working through the access hole, disconnect the electrical connector.
Push the two tabs towards the module assembly in order to release the module from the panel.