October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the spark plug wire assembly.
- Install the right side spark plug wire clip at the ignition coil bracket.
- If only one plug wire was replaced, install the plug wire and close the retaining clip.
- Connect the right side spark plug wires to the ignition coil.
- Connect the right side spark plug wires to the right side spark plugs.
Courtesy of GENERAL MOTORS CORP.
- Install the spark plug wire assembly.
- Install the left side spark plug wire clips at the intake manifold bracket and heater inlet and outlet pipe.
- If only one plug wire was replaced, install the plug wire and close the retaining clips.
- Connect the left side spark plug wires to the ignition coil.
- Connect the left side spark plug wires to the spark plugs.
- Install the intake manifold cover. Refer to Intake Manifold Cover Replacement
.