LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Chevy Express G3500, Van Cargo Extended, 6.6 L >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions (Battery, Charging System And Starting System) >> Battery Current Sensor Replacement (Battery, Charging System And Starting System) >> Installation Procedure (Battery, Charging System And Starting System)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure (Battery, Charging System And Starting System)

    Fig 1: Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS CORP.
    NOTE:

    Ensure that the tape tab is pointing away from the battery prior to installation.

  1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement (V6) , Battery Negative Cable Replacement (LGH - Primary) , Battery Negative Cable Replacement (V8) .
  4. Connect the I/P harness electrical connector to the battery current sensor.
scientia non olet · About LEMON Manuals