LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls And Fuel - 6.2L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement - Left Side >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Secondary Fuel Tank Module & Seal
    GM2195525Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW seal (2).
    2. Fig 2: Fuel Transfer Hose Quick Connect Fitting
    GM2195521Courtesy of GENERAL MOTORS CORP.
  2. Partially install the secondary fuel pump module in order to connect the fuel transfer hose quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 3: Lock Ring
    GM2195514Courtesy of GENERAL MOTORS CORP.
  3. Rotate the lock ring (1) clockwise using the CH-48482:  wrench and install the lock ring.
    4. Fig 4: Secondary Fuel Tank Module Electrical Connector
    GM2195512Courtesy of GENERAL MOTORS CORP.
  4. Connect the secondary fuel tank module electrical connector (1).
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals