LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2011 >> Caprice >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Brake Pedal Position Sensor, Electrical Connector, Locating Tab & Brake Pedal Bracket
    GM1943573Courtesy of GENERAL MOTORS CORP.
  1. Connect the brake pedal position sensor electrical connector (1).
  2. Align the brake pedal position sensor (5).

    Engage the brake pedal position sensor locating tab (3) to the brake pedal bracket (2).

    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the brake pedal position sensor to brake pedal bracket retaining bolt (4).

    Tighten 

    Tighten the bolt to 3 N.m (26 lb ft).

  4. Install the knee bolster. Refer to Knee Bolster Replacement .
  5. Install the instrument panel lower left trim plate assembly. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  6. Calibrate the brake pedal position sensor (5). Refer to Stop Lamp Switch Adjustment .
scientia non olet · About LEMON Manuals