LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Traverse LS, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Frame And Underbody) >> Repair Instructions >> Trailer Hitch Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Trailer Hitch Bolts & Trailer Hitch
    GM1852429Courtesy of GENERAL MOTORS CORP.
  1. Install the trailer hitch (1).
  2. CAUTION: Refer to Fastener Caution .
  3. Install the trailer hitch bolts (2-4).

    Tighten:  Tighten the bolts to 100 N.m (74 lb ft).

  4. Fig 2: View Of Trailer Wire Harness Connector & Trailer Hitch
    GM1852428Courtesy of GENERAL MOTORS CORP.
  5. If previously removed, install the trailer wire harness connector (1) to the trailer hitch (2).
  6. Fig 3: Identifying Body Wire Harness & Trailer Wire Harness Connector
    GM1852427Courtesy of GENERAL MOTORS CORP.
  7. Connect the body wire harness (2) to the trailer wire harness connector (1).
  8. lower the vehicle.