Circuit/System Verification

Ignition ON, command each window UP and DOWN by using the driver, passenger and rear window switches. Each window should perform the UP and DOWN functions from each switch.
- If the driver window does not perform the UP or DOWN function, refer to Driver Window Malfunction .
- If the passenger window does not perform the UP or DOWN function, refer to Passenger Window Malfunction .
- If either rear window does not perform the UP or DOWN function, refer to Rear Window Malfunction .
Disable and enable the rear window switches by pressing and depressing the lockout switch on the driver master control. The rear window switches should be enabled and disabled when changing between the commanded states.
- If both rear window switches continue to function while disabled, refer to Lockout Switch Malfunction .
Command the express down of the driver window by pressing the driver window switch past the first detent and releasing. The driver window should perform the express down function.
- If the function does not perform as specified, replace the driver window switch.