LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2010 >> Chevy Express G2500, Van Passenger >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Vehicle Yaw Sensor With Vehicle Lateral Accelerometer Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the yaw rate sensor and lateral accelerometer (1) to the vehicle.
    Fig 1: Identifying Yaw Rate Sensor/Lateral Accelerometer, Nuts & Electrical Connector
    GM1372891Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the yaw rate sensor and lateral accelerometer nuts (2) and tighten to 9 N.m (80 lb in).
  3. Install a scan tool.
  4. Using the special functions menu on the scan tool, reset the yaw rate sensor.
  5. Perform the Diagnostic System Check. Refer to Diagnostic System Check - Vehicle .
  6. Connect the electrical connector (3) to the yaw rate sensor and lateral accelerometer.
  7. Install the carpet.
  8. Install the passenger seat to the vehicle. Refer to Driver or Passenger Seat Replacement .
scientia non olet · About LEMON Manuals