October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Passenger Presence System Preload System Test Procedure (New Module)
- Empty the front outboard passenger seat.
- With the scan tool, perform the Preload Passenger Presence System procedure.
- If the test fails, adjust the seat bottom trim, and massage the cover to ensure unwanted pressure is not present in the specified area. Proceed to the Passenger Presence System Preload Test (Existing Module) to retest after adjustment is made.
- Once the test successfully completes, cycle the ignition key OFF.
- Perform the Diagnostic System Check - Vehicle
after successfully completing the preload test procedure to ensure the system is functioning properly.