LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Traverse LT, AWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> Starter Solenoid Does Not Click >> Component Testing >> Shift Position Switch Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Shift Position Switch Test

  1. Ignition OFF, disconnect the shift position switch harness at the TCM.
  2. With the switch in the following positions, test for infinite resistance between the ground terminal A and the signal terminal F.
    • R
    • OD
    • D
    • 2
    • 1
    • If not the specified value, replace the shift position switch.
  3. With the switch in the following positions, test for less than 2 Ω between the ground terminal A and the signal terminal F.
    • P
    • N
    • If greater than the specified range, replace the shift position switch.
scientia non olet · About LEMON Manuals