Front Fog Lamp Replacement (OUTLOOK)
WARNING: This page is about a different car, the 2010 Saturn Outlook, 2010 GMC Acadia, 2010 Chevrolet Traverse, and 2010 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the park, and turn signal lamp bracket assembly. Refer to Parking and Turn Signal Lamp Bracket Replacement (OUTLOOK) . |
|
| 1 | Front Fog Lamp Assembly Screw (Qty: 2)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2.0 N.m (18 lb in) |
| 2 | Front Fog Lamp Adjuster Screw Procedure: Aim the fog lamps after the park, and turn signal lamp bracket has been re-installed. Refer to Fog Lamp Aiming (Acadia) or Fog Lamp Aiming (Enclave) . Procedure is similar to Outlook. Tip: Count the reverse turns of the adjuster screw in order to have the same number of turns upon re-assembly. |
| 3 | Front Fog Lamp Adjuster Screw Retainer Tip: Ensure the retainer is fully seated into the park, and turn signal lamp bracket prior to installing the adjuster screw. |
| 4 | Front Fog Lamp Assembly
WARNING:
Refer to Halogen Bulb Warning
. Tip: Transfer the fog lamp bulb as needed. |