LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Tahoe Base, 4.8 C >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Side Object Sensor Bracket Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Side Object Sensor Bracket Replacement

Fig 1: Side Object Sensor Bracket
GM2136064Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Raise the Vehicle. Refer to Lifting and Jacking the Vehicle
  2. Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) or Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) .
1 Side Object Sensor Bracket Nuts (Qty: 3)
CAUTION: Refer to Fastener Caution .

Tighten::  6 N.m(53 lb in)
2 Side Object Sensor Bracket
Procedure: 
Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals