July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Radiator Replacement

WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator

GM1617336

Courtesy of GENERAL MOTORS COMPANY

Radiator Replacement

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716 Fill) , Cooling System Draining and Filling (Static Fill-LE8, LE9) . Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement . Remove the hood latch from the tie bar and set aside. Refer to Hood Primary and Secondary Latch Replacement . Remove the transmission lines from the radiator. Refer to Transmission Fluid Cooler Hose Replacement . Remove the radiator inlet hose from the radiator. Refer to Radiator Inlet Hose Replacement . Remove the radiator outlet hose from the radiator. Refer to Radiator Outlet Hose Replacement (LE8, LE9) .
1	Radiator Bracket Assembly Bolt CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Radiator Bracket Assembly
3	Radiator Assembly Procedure Lift up on the fan assembly and remove from the radiator and set a side. Push in on the retaining tabs to release the condenser from the radiator and set aside.