License Lamp Bulb Replacement
WARNING: This page is about a different car, the 2008 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Screws, Rear License Plate Lamp Lens (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 2 | Lens, Rear License Plate Lamp (Qty: 2) |
| 3 | Bulb, Rear License Plate Lamp Tip: Carefully pull the bulb downward from the lamp socket in order to remove. |