LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Equinox LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.4L - Introduction >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Lubricate the CMP sensor O-rings with clean engine oil.
    2. Fig 1: View Of CMP Sensor
    GM1087797Courtesy of GENERAL MOTORS CORP.
  2. Install the CMP sensor (1).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the CMP sensor bolt (2).

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  4. Connect the engine wiring harness electrical connector to the CMP sensor.
  5. Install the air cleaner inlet duct. Refer to Air Cleaner Inlet Duct Replacement .
scientia non olet · About LEMON Manuals