LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2009 >> Equinox FWD V6-3.6L >> Repair and Diagnosis >> Maintenance >> Alignment >> Service and Repair >> Rear Camber Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Rear Camber Adjustment




Rear Camber Adjustment




1. Loosen the upper control arm-to-frame fastener enough to allow movement.

Note: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.

2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
4. Reinspect the rear camber specifications and adjust as necessary.

Caution: Refer to Fastener Caution (Fastener Caution).

5. Hold the nut and tighten the upper control arm-to-frame bolt to 164 Nm (121 lb ft).
6. Repeat the procedure for the other rear wheel.

scientia non olet · About LEMON Manuals