LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Uplander Base, 3.9 1 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> LED Indicator Replacement - Vehicle Security System >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the instrument panel upper trim.
    2. Fig 1: View Of Security Indicator Lamp
    GM315292Courtesy of GENERAL MOTORS CORP.
  2. Remove the security indicator lamp from the instrument panel upper trim:
    1. Rotate the lamp counterclockwise to approximately 1/4 turn.
    2. Pull the lamp out.
  3. Disconnect the security indicator lamp electrical connector from the security indicator lamp.
scientia non olet · About LEMON Manuals