LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> Impala V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Accelerator Pedal Position Sensor: Service and Repair



Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Remove the left instrument panel (I/P) sound insulator.
2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).




3. Remove the APP sensor assembly bolts.
4. Remove the APP sensor assembly from the vehicle.

Installation Procedure




1. Position the APP sensor assembly to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the APP sensor assembly bolts.

Tighten the bolts to 5 N.m (44 lb in).




3. Connect APP sensor electrical connector (1).
4. Install the left I/P sound insulator.
scientia non olet · About LEMON Manuals