LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2008 >> HHR SS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - DTC P0010 To DTC P0238 >> DTC P0010 or P0011 >> Component Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Testing

  1. Measure the resistance of CMP actuator solenoid valve assembly. Resistance should be between 8-15 ohms.
  2. Connect a jumper wire between the CMP actuator solenoid control circuit at the solenoid and a good ground. Connect a fused jumper wire to the CMP actuator solenoid ignition voltage circuit at the solenoid. Momentarily touch the fused jumper to B+. The spool valve should move from fully closed to fully opened position.
scientia non olet · About LEMON Manuals