LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Malibu Maxx SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 689 (Object Detection System) >> Diagnostic Information and Procedures >> Information Center Telltale Malfunction >> Circuit/System Verification
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Sensor Feed Voltage Output parameter. The reading should be between 8.0-9.0 volts.
  2. Perform the LED Test, using the scan tool. Observe the operation of the three LEDs. All three LEDs should illuminate.