Ignition Coil: Service and Repair

Ignition Coil Replacement

Removal Procedure




1. Disconnect the engine wiring harness electrical connectors (1) from the ignition coil(s).




2. Remove the ignition coil bolt(s).
3. Remove the ignition coil(s).

Installation Procedure




1. Install the ignition coil(s).

Notice: Refer to Fastener Notice.

2. Install the ignition coil bolt(s).

Tighten the bolt(s) to 10 N.m (89 lb in).




3. Connect the engine wiring harness electrical connectors (1) to the ignition coil(s).