LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Front Camber Adjustment >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the strut to the vehicle. Refer to Strut, Strut Component and/or Spring Replacement .

    Tighten:  Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.

    Fig 1: Adjusting Front Camber
    GM156937Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  3. Adjust the camber (1).

    Tighten:  Tighten the strut-to-knuckle nuts to 130 N.m (96 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals