LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Engine Controls And Fuel - 2.4L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying the Fuel Level Sensor and Alignment Feature
    GM2042226Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (1) to the alignment feature (2).
    2. Fig 2: Identifying Fuel Level Sensor Electrical Connector and Locking Tab
    GM2042219Courtesy of GENERAL MOTORS CORP.
  2. Allow the locking tab (2) to lock into place.
  3. Connect the fuel level sensor electrical connector (1).
  4. Install the fuel pump module assembly. Refer to Fuel Tank Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals