LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 784 (Suspension Control System - Automatic Level Control) >> Repair Instructions >> Air Tube Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Harness Tie & Bolts From Air Compressor Bracket & Air Tube From Air Dryer
    GM227996Courtesy of GENERAL MOTORS CORP.
  2. Remove the air tube from the air dryer.
  3. Remove the bolt and the harness tie from the air compressor bracket.
  4. Remove both rear wheels. Refer to Tire and Wheel Removal and Installation .
    5. Fig 2: Identifying Air Tubes Connected To Shock Absorbers
    GM517949Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the air tube from the left and right rear shock absorbers.
  6. Remove the 2 metal clips from the air tube and the vehicle.
  7. Remove the air tube with the 3 clips from the vehicle.
scientia non olet · About LEMON Manuals