Circuit Description
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Battery positive voltage is applied at all times to both the coil and switched sides of the DRL PCB Relay. The daytime running lamps (DRL) are controlled by the body control module (BCM). The BCM grounds the DRL relay control circuit in order to energize the DRL PCB relay coil. With the relay energized, voltage is applied through the switch side of the relay, both LOW BEAM Fuses, and the headlamp low beam supply voltage circuits to the low beam headlamps.