LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System & Traction Control System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Brake Pressure Modulator Valve Bracket Replacement

Fig 1: Brake Pressure Modulator Valve Bracket
GM1658843Courtesy of GENERAL MOTORS CORP.
Brake Pressure Modulator Valve Bracket Replacement

Callout Component Name

Preliminary Procedures

  1. Turn the ignition switch to the OFF position.
  2. Without disconnecting the brake pipes, remove and position aside the electronic brake control module (EBCM). Refer to Brake Pressure Modulator Valve Replacement .
  3. Support the EBCM with heavy mechanics wire or equivalent.
1 Nut, BPMV Bracket Retaining

Tighten:  3 N.m (27 lb in)

NOTE: Refer to Fastener Notice .
2 Nut, BPMV Bracket Retaining (Qty: 3)

Tighten:  10 N.m (89 lb in)
3 Bracket, BPMV
scientia non olet · About LEMON Manuals