Installation Procedure

Position the front door window channel front channel into the front door.

Fig 1: View Of Front Door Window Channel (Impala)
Courtesy of GENERAL MOTORS CORP.
Install the front door window channel screws.
Tighten: Tighten the front door window channel screws to 10 N.m (89 lb in).

Fig 2: View Of Front Door Window Channel Screws (Impala)
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .
Install the front door window channel to the front door starting in the top corner working out in both directions.
Firmly seat the front door window channel to the front door.

Fig 3: View Of Front Door Window Channel & Front Door Frame (Impala)
Courtesy of GENERAL MOTORS CORP.
Install the front door rear window channel to the front door through the access hole in the inner front door panel.

Fig 4: View Of Front Door Rear Window Channel (Impala)
Courtesy of GENERAL MOTORS CORP.

Fig 5: View Of Front Door Rear Window Channel (Impala)

Courtesy of GENERAL MOTORS CORP.

Install the front door rear window channel to the front door slot by pushing up to engage the retainer clip.
Install the screw to the front door rear window channel.
Tighten: Tighten the front door weatherstrip channel screws to 10 N.m (89 lb in).

Fig 6: View Of Front Door Rear Window Channel Bolt (Impala)
Courtesy of GENERAL MOTORS CORP.
Install the front door window. Refer to Front Side Door Window Replacement (Impala) or Front Side Door Window Replacement (Monte Carlo) .
Inspect the front door window for proper operation.
Install the front door outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer (Impala) or Sealing Strip Replacement - Front Door Window Belt Outer (Monte Carlo) .
Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement (Impala) or Front Side Door Water Deflector Replacement (Monte Carlo) .
Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement (Impala) .