LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Corvette V8-6.0L >> Repair and Diagnosis >> Wiper and Washer Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



Scan Tool Data Definitions
Headlamp Wash Relay Cmd.
- The scan tool displays On/Off. When the body control module (BCM) commands the headlamp washers on, the scan tool parameter displays the output to the headlamp wash relay as On.

Windshield Washer Fluid
- The scan tool displays the status of the washer fluid level switch.

Windshield Washer Switch
- The scan tool displays On/Off. When the windshield washer switch is pressed, the scan tool parameter will display the switch signal to the BCM as On.

Windshield Wiper Switch
- The scan tool displays Off/Delay 1,2,3,4,5/Low/Mist/Hi. When the windshield wiper system is active, the scan tool will display the selected wiper; Delay 1,2,3,4,5, Low, Mist, or Hi mode.

Wiper Motor Relay Command
- The scan tool displays On/Off. When the windshield wiper system is in the active state, the scan tool displays the BCM commanded output to the wiper relay as On.

Wiper Park Switch
- The scan tool displays On/Off. The scan tool displays the state of the wiper park switch.
scientia non olet · About LEMON Manuals