LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Corvette V8-6.0L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



Scan Tool Data Definitions

Ignition Voltage
- The scan tool displays 0-17 volts. The amount of ignition voltage at the EBCM.

Left Front Wheel Speed
- The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left front wheel.

Left Rear Wheel Speed
- The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left rear wheel.

Right Front Wheel Speed
- The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right front wheel.

Right Rear Wheel Speed
- The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right rear wheel.

Switched System Battery Voltage
- The scan tool 0-17 volts. The level of internal EBCM voltage available to the VES actuator when the ABS relay is energized.

VES Commanded Current
- The scan tool displays -2.00 to 3.00 amps. The amount of current the EBCM is commanding to the VES actuator.

VES Failed
- The scan tool displays Yes or No. Yes indicates a malfunction has been detected within the VES system. No indicates the VES system is operating to specification.

VES Feedback Current
- The scan tool displays 2.00 to 3.00 amps. The absolute, or positive value of current returning from the VES actuator to the EBCM. Thus the - symbol is not displayed.

VES Indicator/Message
- The scan tool indicates ON or Off. The state of the VES malfunction indicator or message, if equipped.

scientia non olet · About LEMON Manuals