LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Colorado 2WD L4-2.9L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Lumbar Switch Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Lumbar Switch Replacement



LUMBAR SWITCH REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat cushion outer trim panel.
2. Remove the switch bezel from the seat assembly.
3. Remove the buttons from the switch (3).




4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.




5. Disconnect the lumbar switch harness (1) from the seat harness.
6. Remove the lumbar switch from the seat bezel.

INSTALLATION PROCEDURE




1. Connect the lumbar switch harness (1) to the seat harness.




2. Install the lumbar switch (3) to the seat bezel. Verify that the retaining tabs (4) are fully seated.
3. Install the buttons on the switch.
4. Install the switch bezel assembly to the seat assembly.
5. Install the seat cushion outer trim panel.
scientia non olet · About LEMON Manuals