LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Aveo L4-1.6L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



Scan Tool Data Definitions

The Data Display function contains lists of ABS and TCS data parameters. A brief description of all ABS and TCS data parameters available on the scan tool are listed below. The list is arranged in alphabetical order.

ABS Warning Indicator
- The scan tool will display On or Off depending on the state of the ABS indicator.

Battery Voltage Signal
- The scan tool displays 0 to 30 Volts. The voltage measured between the module's battery positive voltage circuit and ground circuit.

Brake Switch
- The scan tool displays Applied or Released. The scan tool displays the state of the brake switch.

DRP Disabled
- The scan tool will display Yes or No. This will indicate if the DRP has been disabled.

LF Inlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the LF inlet solenoid.

LF Outlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the LF outlet solenoid.

LF Wheel Speed Sensor
- The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the left front wheel.

LR Inlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the LR inlet solenoid.

LR Outlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the actual state of the LR outlet solenoid.

LR Wheel Speed Sensor
- The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the left rear wheel.

Pump Motor Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor.

Pump Motor Relay Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor relay.

RF Inlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the RF inlet solenoid.

RF Outlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the RF outlet solenoid.

RF Wheel Speed Sensor
- The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the right front wheel.

RR Inlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the RR inlet solenoid.

RR Outlet Solenoid Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the RR outlet solenoid.

RR Wheel Speed Sensor
- The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the right rear wheel.

Solenoid Relay Command
- The scan tool displays On or Off. The scan tool displays the commanded state of the solenoid relay.

scientia non olet · About LEMON Manuals