LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 3.9L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Fuel Level Sensor
    GM1544791Courtesy of GENERAL MOTORS CORP.
  1. Remove fuel tank module. Refer to Fuel Tank Module Replacement (Short Wheel Base)  or Fuel Tank Module Replacement (Long Wheel Base) .
  2. Disconnect the fuel level sensor electrical connector (1) from under the cover.
  3. Gently lift up the retainer (2) and slide the sensor down off of the bucket.