LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Front End) >> Repair Instructions >> Splash Shield Replacement - Engine >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Splash Shield & Retainers
    GM317813Courtesy of GENERAL MOTORS CORP.
  1. Remove the push-in retainers that hold the ABS lead to the engine splash shield.
  2. Use the J 38778  in order to remove the push-in retainers from the engine splash shield.
    3. Fig 2: Right Engine Splash Shield & Retainers
    GM317814Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine splash shield from the lower flange of the engine compartment side rail.
scientia non olet · About LEMON Manuals