LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Rear Parking Assist System) >> Repair Instructions >> Object Alarm Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: RPA Receiver
    GM1357202Courtesy of GENERAL MOTORS CORP.
  1. Install the RPA receiver to the rear window shelf.
  2. Install the RPA receiver fastener.
    3. Fig 2: Rear Parking Assist (RPA) Receiver Electrical Connector
    GM1357333Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (2) to the RPA receiver.
  4. Install the rear window shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
scientia non olet · About LEMON Manuals