LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 184 (Seat System) >> Repair Instructions >> Front Heated Seat Control Module Replacement (Impala)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Heated Seat Control Module Replacement (Impala)

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Replacing Front Heated Seat Control Module
GM1583674Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module Replacement - Front (Impala)

Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedure

  1. Remove the front seat. Refer to Seat Replacement - Front Bucket (Impala)  or Seat Replacement - Front Bucket (Monte Carlo) .
  2. Remove the front seat adjuster. Refer to Seat Adjuster Replacement - Front (Impala)  or Seat Adjuster Replacement - Front (Monte Carlo) .
1 Screw, Front Seat Heater Control Module (Qty: 2)

Tighten:  2 N.m (18 lb in)
2 Module, Front Seat Heater Control
Tip:  Disconnect the electrical connector.
scientia non olet · About LEMON Manuals