Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Child Restraint Tether Brackets

Courtesy of GENERAL MOTORS CORP.

Install the child seat tether brackets to the slots in the rear shelf.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the child seat tether bracket to rear shelf bolts.
Tighten: Tighten the child seat tether bracket to rear shelf bolts to 20 N.m (15 lb ft).
Push the sound barrier back into its original position.
Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.