LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Chain Cover Replacement - Sit-N-Lift >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Locating Screws For Roll-Up Chain Cover
    GM1368539Courtesy of GENERAL MOTORS CORP.
  1. Install the roll-up chain cover.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the chain cover.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 2: Locating Fasteners For Rear Of Seat
    GM1368537Courtesy of GENERAL MOTORS CORP.
  3. Install the fasteners to the rear of the seat.
  4. Return the seat to the vehicle.
  5. Test the seat for proper operation.
scientia non olet · About LEMON Manuals