Installation Procedure
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the antenna module to the vehicle.
- Install the screw retaining the antenna module to the cross-car beam (2).
- Tighten the screw.
Tighten: Tighten the screw to 2.5 N.m (22 lb in).
- Install the I/P assembly. Refer to Instrument Panel Assembly Replacement .
- Connect the electrical connector to the navigational radio (1).
- Install the navigational radio. Refer to Radio Replacement .
NOTE:
Refer to Fastener Notice
.