LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Battery, Charging System And Starting System) >> Repair Instructions >> Ground Strap Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Oil Temperature Sensor Electrical Connector
    GM651886Courtesy of GENERAL MOTORS CORP.
  1. Position the ground strap terminal (1) and engine harness ground to the block.
    NOTE: Refer to Fastener Notice .
  2. Install the ground strap bolt.

    Tighten:  Tighten the ground strap bolt to 32 N.m (24 lb ft).

    3. Fig 2: Ground Strap Terminal At Frame Stud
    GM675395Courtesy of GENERAL MOTORS CORP.
  3. Lower the vehicle.
  4. Install the ground strap terminal and nut to the stud.

    Tighten:  Tighten the ground strap nut to 8 N.m (71 lb in).

scientia non olet · About LEMON Manuals