Installation Procedure
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the power steering fluid reservoir (2) to the vehicle.
- Install the following components to the power steering fluid reservoir (2):
- The power steering reservoir outlet pipe/hose. Refer to Power Steering Reservoir Outlet Pipe/Hose Replacement .
- The power steering return hose. Refer to Power Steering Return Hose Replacement (FE) .
- Install the power steering fluid reservoir (2) to the power steering fluid reservoir bracket (5).
- Bleed the power steering system. Refer to Power Steering System Bleeding .
IMPORTANT:
Make sure that the alignment mark on the power steering return hose is installed at the bottom of the power steering reservoir.