LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: View of Engine Sight Shield
    GM1231427Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine sight shield and mounting bracket. Refer to Engine Sight Shield Replacement in Engine Mechanical - 6.0L.
    2. Fig 2: Removing/Installing Manifold Absolute Pressure (MAP) Sensor
    GM1491729Courtesy of GENERAL MOTORS CORP.
  2. Remove the electrical connector (1).
  3. Remove the retaining clip (2) for the manifold absolute pressure (MAP) (3) sensor.
  4. Remove the MAP sensor (3) and seal (4) from the intake manifold (5).
scientia non olet · About LEMON Manuals