Installation Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.
- Install the passenger air bag module to the instrument panel (I/P).
- Install the passenger air bag module mounting bolts.
Tighten: Tighten the passenger air bag module mounting bolts to 11 N.m (97 lb in) .
- Connect the passenger air bag yellow electrical connector.
- Install the glove box. Refer to Storage Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.