LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Malibu Maxx SS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the automatic transaxle control assembly. Refer to Floor Shift Control Replacement .
    Fig 1: Disconnecting Shift Lock Control Solenoid Connector From Solenoid
    GM1285267Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the Shift Lock Control Solenoid connector from the solenoid.
  3. Using a flat-blade screwdriver or similar tool pry the solenoid off of the ball-sockets on the solenoid plunger and solenoid body.
    Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body
    GM1285268Courtesy of GENERAL MOTORS CORP.
  4. Remove the shift lock control solenoid.
    Fig 3: Removing Shift Lock Control Solenoid
    GM1285269Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals