Theft Deterrent Control Module Replacement

Fig 1: Theft Deterrent Control Module Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 . Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement . Program the theft deterrent control module after replacement. Refer to Control Module References .
1	Module Assembly, Theft Deterrent Tip: Pull out away from ignition cylinder and disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 .
Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
Program the theft deterrent control module after replacement. Refer to Control Module References .

Module Assembly, Theft Deterrent
Tip: Pull out away from ignition cylinder and disconnect the electrical connector.